If you want to make kites with kids this is a good one to start with. Make a template out of cardbord, cut the ( plastic) sails beforehand and let the children paint it with permanent markers.
The construction is very simple and similar to the Dr. Deleto Eddy: The frame can be made out of dowel: 1/4" ( 6 mm) will do fine for a 3 ' span, It needs a dehedral connector and it has no bridle: just tie the flying line to the center connector and it flies.
You can also attach colorful streamers to the wingtips or tail
The alternative for making a dehedral connector is bowing a full length horizontal spar and tying that to the vertical spine; the depth of the bow should be approx. 15 % of the span.
NOTE:
I mentioned a plastic sail, but it can also be made of ( hotcut ) ripstop, tyvek or cotton fabric.
Burda yazdığı bow neye göre %15?
Omurgayı bitirdim, kumaşı kaplamadım. Resimleri koyamıyorum
free bir yer bulamadım (resimgalerisi.net kapanmış).
Bir sorum var, altındaki oval yere kumaşı nasıl kaplıyacağım , denedim
fakat biraz yaptıktan sonra kumaş üst üste biniyor, onu nasıl giderebilirim?
, on metre kadar yükseliyor sol tarafa yatıp kafa üstü